Cisco Security Commands

Cisco AutoSecureCopiar enlace

Router# auto secure

• This command enables the Cisco AutoSecure feature, which helps to secure a device by applying security best practices. It doesn't provide complete protection but enhances security.

Password Security CommandsCopiar enlace

1. Encrypt passwords

   Copiar texto

   R1(config)# service password-encryption

   • This command encrypts all plaintext passwords in the device's configuration, preventing unauthorized users from seeing them in clear text.

2. Set a minimum password length

   Copiar texto

   R1(config)# security passwords min-length 8

   • This enforces a minimum length of 8 characters for all passwords to enhance password security.

3. Limit failed login attempts

   Copiar texto

   R1(config)# login block-for 120 attempts 3 within 60

   • This command blocks login attempts for 120 seconds if there are 3 failed login attempts within 60 seconds, helping to mitigate brute-force attacks.

4. Configure password on VTY lines

   Copiar texto

   R1(config)# line vty 0 4
   R1(config-line)# password cisco123

   • This sets the password for virtual terminal (VTY) lines 0 to 4 (for remote access via SSH or Telnet) to cisco123.

5. Set exec-timeout for idle VTY sessions

   Copiar texto

   R1(config-line)# exec-timeout 5 30

   • This command ensures that an idle VTY session (remote access session) will automatically log out after 5 minutes and 30 seconds of inactivity.

6. Restrict VTY access to SSH only

   Copiar texto

   R1(config-line)# transport input ssh

   • This command disables Telnet and allows only SSH connections for remote access, enhancing security by using an encrypted protocol.

Summary:

R1(config)# service password-encryption
R1(config)# security passwords min-length 8
R1(config)# login block-for 120 attempts 3 within 60
R1(config)# line vty 0 4
R1(config-line)# password cisco123
R1(config-line)# exec-timeout 5 30
R1(config-line)# transport input ssh
R1(config-line)# end
R1#
R1# show running-config | section line vty
line vty 0 4
password 7 094F471A1A0A
exec-timeout 5 30
login
transport input ssh
R1#

SSH Configuration CommandsCopiar enlace

1. Enter global configuration mode

   Copiar texto

   Router# configure terminal

2. Set the router's hostname

   Copiar texto

   Router(config)# hostname R1

   • This sets the hostname of the device to R1.

3. Set the domain name

   Copiar texto

   R1(config)# ip domain name span.com

   • This sets the IP domain name to span.com, necessary for generating an SSH key pair.

4. Generate the RSA key pair for SSH

   Copiar texto

   R1(config)# crypto key generate rsa general-keys modulus 1024

   • This generates an RSA key pair with a modulus size of 1024 bits for SSH encryption. Larger key sizes are more secure but may increase the time it takes to encrypt/decrypt traffic.

5. Create a local user with a password

   Copiar texto

   R1(config)# username Bob secret cisco

   • This creates a local user Bob with the password cisco. The secret keyword encrypts the password.

6. Enter configuration mode for VTY lines

   Copiar texto

   R1(config)# line vty 0 4

7. Enable local authentication for VTY lines

   Copiar texto

   R1(config-line)# login local

   • This configures the device to authenticate remote users (on VTY lines) using the local user database.

8. Enable SSH for VTY lines and disable Telnet

   Copiar texto

   R1(config-line)# transport input ssh

   • This command allows only SSH connections and disables Telnet on VTY lines.

9. Exit VTY configuration mode

   Copiar texto

   R1(config-line)# exit

10. Return to global configuration mode

    Copiar texto

    R1(config)#

Summary:

Router# configure terminal
Router(config)# hostname R1
R1(config)# ip domain name span.com
R1(config)# crypto key generate rsa general-keys modulus 1024
The name for the keys will be: Rl.span.com % The key modulus size is 1024 bits
% Generating 1024 bit RSA keys, keys will be non-exportable...[OK]
Dec 13 16:19:12.079: %SSH-5-ENABLED: SSH 1.99 has been enabled
R1(config)#
R1(config)# username Bob secret cisco
R1(config)# line vty 0 4
R1(config-line)# login local
R1(config-line)# transport input ssh
R1(config-line)# exit
R1(config)#

Disable Unused ServicesCopiar enlace

Here’s each command with its explanation:

# Show all active ports on the router
show ip ports all

• Displays all open TCP and UDP ports on the router, including the processes using them.
• Useful for identifying unnecessary or risky services running on the device.

# Show open ports on the control-plane
show control-plane host open-ports

• Lists all active connections on the control plane, including listening services.
• Helps determine which services are exposed and need to be secured.

# Enter global configuration mode
configure terminal

• Enters the router’s configuration mode, allowing modifications to settings.

# Disable the HTTP server
no ip http server

• Turns off the embedded HTTP service to prevent web-based management, reducing attack surface.

# Configure virtual terminal (VTY) lines 0-15
line vty 0 15

• Selects the virtual terminal lines used for remote access (like Telnet or SSH).

# Allow only SSH for remote access
transport input ssh

• Restricts remote access to SSH only, disabling Telnet for improved security.

Summary:

Router# show ip ports all
Proto Local Address               Foreign Address             State       PID/Program Name
TCB       Local Address               Foreign Address             (state)
tcp   :::443                     :::*                        LISTEN      309/[IOS]HTTP CORE
tcp   *:443                      *:*                         LISTEN      309/[IOS]HTTP CORE
udp   *:67                        0.0.0.0:0                               387/[IOS]DHCPD Receive
Router#

Router# show control-plane host open-ports
Active internet connections (servers and established)
Prot        Local Address      Foreign Address                  Service    State
tcp                 *:23                  *:0                   Telnet   LISTEN
tcp                 *:80                  *:0                HTTP CORE   LISTEN
udp                 *:67                  *:0            DHCPD Receive   LISTEN
Router# configure terminal
Router(config)# no ip http server
Router(config)# line vty 0 15
Router(config-line)# transport input ssh